Basic Info.
Product Description
5kv Megger High Voltage Insulation Digital Tester-YH510
5kv Insulation Tester
5kv Megger
5kv Megohmeter
Ihigh Voltage insulation Digital Tester
Measurement Categories
This tester meets the safety requirements of CAT IV (600V) and CAT III (1000V). In order to make sure that meters are used safely, IEC 61010 specifies safety standards for electrical environment, which are broken down into categories from CAT I to CAT IV and known as the measurement categories.
MAIN FUNCTIONS
Measurement of Insulation Resistance and Leak Current
Test Voltage: DC250V~5.00kV, Test Insulation Resistance 0 to 5TΩ ; Max Test Current 1mA
Able to display insulation resistance, leak current, PI, DAR, and measurement time.
Stepped Voltage Test
Test voltage is gradually increased to measure variations of insulation resistances and leak currents under different voltages.
Two types of stepped voltage values are optional, and measurement time can be selected for respective stepped stages.
Display of PI (Polarization Index) and DAR (Dielectric Absorption Rate)
Able to automatically measure parameters of PI and DAR.
Measurement of Hot Line Voltage
Able to measure AC and DC voltages
AC: AC50~750V, Frequency: 50Hz/60Hz
DC: DC± 50~± 1000V
Precision of Measurement: ± 5%rdg. ± 5%dgt
Temperature Measurement
10~70° C Precision of Measurement: ± 1.5° C
Data Storage Function
Able to manually store 100 groups of data, and also able to automatically record 10 groups of data, with each group able to store 360 measurement points in maximum.
Data Uploading Function
Able to upload the store data into PC through USB interface, to be formed into graphic charts and to be printed for filing, and also able to set up and modify measurement parameters at PC end.
Supports USB2.0 (Full Speed)
Parameter Indicators
Environmental Range of Temperature and Humidity: 0~40° C, 90%rh below (non-condensed)
Display: LCD Display, with Back Light
Display Refresh Rate: 1 Time/s (0.25 T/s during use of average value function)
Output Voltage Monitoring: 2 Times/s
Voltage Measurement: 4 Times/s
Temperature Measurement: 1 Time/s
Analog Bar: 2 Times/s
Battery: 6# Battery x 6 Ni-MH Chargeable Battery, 7.2V
Max Rated Power: 15W
Time for Continuous Use: Dry batter can last 5 hours and chargeable battery can last 9 hours, under the condition of 5kV generation, +/-ports disconnected and back light closed.
Max Rated Voltage to Ground: 600Vrms(CAT IV), 1000Vrms(CAT III)
Insulation Level: AC7000V 15s between electrical loop and casing.
Features
1)Test Voltage and Insulation Resistance Measurement in Broad RangeTest voltage ranges from 250V to 5kV, in 25V stepped setup, and able for measurement of 5TΩ Insulation resistance in maximum.
2)Supports Various Insulation Judgments
Able for computation and display of PI (Polarization Index)and DAR (Dielectric Absorption Rate), as well as stepped voltage test (five steps, with voltage and time for each step adjustable), temperature compensation, temperature measurement, leakage current display, and other insulation judgment functions.
3)Data Storage and Upload Function
Able to manually store 100 data, automatically record 10 groups of data (360 measurement points in maximum for each data group), and automatically record date and time.
4)Carrying Case
Hard carrying case adaptable to field application is adopted.
5)Chargeable batteries can be used at the same time
Able to be loaded with 2# batteries and chargeable batteries at the same time, and when capacity of one group of batteries is insufficient, it can be switched to another group for further use.
Address:
a-15d, Mx Commercial Building, Bai Hua Street, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Health & Medicine, Industrial Equipment & Components, Instruments & Meters
Company Introduction:
Since established, PEAKMETER has been working as so called an "electric meters and instruments provider". Throughout the life of PEAKMETER, we have found that it is important to listen to customers and offer them good products and services to meet their current and future requirements. Due to the nature of our business, we try to as efficient as possible support customers with any problem which they may encounter. As a result of these efforts, we are enjoying a long-standing relationship with our customers, like HT Italia for years.
OUR SERVICES:
We are developing, producing and marketing instruments and meters. Meanwhile, we provide OEM ODM services for customer if they need.
OUR R&D TEAM:
Our R&D Team have over 20 years R&D experience in electric instrument field.
OUR MISSION:
Our mission is to get our work done well to become customers′ reliable business friend.
OUR PRODUCTS:
Digital multimeters
Clamp meters
Earth ground testers
Insulation testers
Electrical testers
Digital Tachometers
Process calibrator
Thermometers
Environmental Meters
Network cable testers
Laser distance meters